How do I configure Vlan on HP switch?
How do I configure Vlan on HP switch?
To configure basic settings of a VLAN interface:
- Enter system view, use the command: system view.
- Create a VLAN interface and enter VLAN interface view. interface vlan-interface vlan- interface-id.
- Assign an IP address to the VLAN interface.
- Configure the description of the VLAN interface.
- Bring up the VLAN interface.
How do I create a Vlan on my HP Router?
Configuration procedure Create VLAN 200, and assign port GigabitEthernet 4/1/2 to VLAN 200. Configure port GigabitEthernet 4/1/3 as a trunk port, and assign it to VLANs 100 and 200, enabling GigabitEthernet 4/1/3 to forward traffic of VLANs 100 and 200 to Router B. Please wait… Done.
How do I add a port to a Vlan on a HP ProCurve?
To assign an access port (in interface view) or multiple access ports (in port group view) to a VLAN:
- Enter system view, use the command: system view.
- Enter interface view or port group view. Enter Layer 2 Ethernet interface view.
- Configure the link type of the ports as access.
- Assign the access ports to a VLAN.
How do I set up voice Vlan on HP ProCurve switch?
Create voice Vlan such as Vlan 3 and configure the ports that will be connected to phones as “tagged” in Vlan 3. Add the voice parameter to make it a voice Vlan. Assign an ip address to voice Vlan 3. Use the CLI in the HP ProCurve switch and issue the ip helper-address command on the Voice Vlan in the switch.
How do I set up voice and data VLANs?
- Add the VLANs in the Switch: Switch# configure terminal.
- LLDP should be activated in Switch so it can differentiate DATA and VOICE traffic. Switch# configure terminal.
- Uplinks should be configured as trunk port. Switch# configure terminal.
- Data/Voice port interface should be as below. Switch# configure terminal.