How do I enable my mouse in DOS?

How do I enable my mouse in DOS?

For a mouse to work in an MS-DOS environment, load the Microsoft mouse driver mouse.com in the autoexec. bat file or the mouse device driver mouse. sys loading in your config.

Did MS-DOS have a mouse?

In March 1983, both MS-DOS 2.0 and the IBM PC/XT were released. The rest, as they say, is history. MS-DOS 3.0 followed in 1984 (alongside the IBM PC/AT), and MS-DOS 4.0 with a mouse-powered, menu-driven interface arrived in 1989.

How do I install a serial mouse?

Installing a Microsoft Serial Mouse

  1. Turn the computer off.
  2. Connect the plug for the Microsoft serial mouse to an open serial port on the back of the computer.
  3. Turn the computer on.
  4. Connect the Microsoft serial mouse directly to the computer if you are using a keyboard/video/mouse switch.

What is mouse Sys?

DEVICE=\OS2\BOOT\MOUSE.SYS Lets you use a mouse or track ball. This line also identifies the device dependent type of mouse you have and which COM port it is on. In this case, the device dependent mouse driver is loaded in your OS/2 CONFIG.

Which function key is for mouse?

Mouse Keys is an accessibility feature that uses the keyboard’s Numeric Keypad as a pointing device. This replaces using the mouse as a pointing device. To activate Mouse Keys – Press Alt + Left Shift + Num Lock.

How do I fix my mouse not working?

How to Fix a PC or Laptop Mouse That’s Not Working

  • Inspect the mouse for hardware damage.
  • Clean the mouse.
  • Replace the batteries.
  • Try a different USB port.
  • Connect the mouse directly to the USB port.
  • Use the mouse on an appropriate surface.
  • Update the driver.
  • Release and re-pair a Bluetooth mouse.

What was used before mouse?

Before computer mouse was invented, DATA WAS ENTERED BY TYPING COMMANDS WITH THE KEYBOARD. The first computer mouse was invented by Douglas Engelbart in 1964. It was designed as a wooden box, with two metal wheels that make contact with the surface and only one key.

When did Microsoft DOS come out?

August 1981
Version 1.0 of PC-DOS was released with the first IBM PC in August 1981. Version 1.1, which supported double-sided (320 KB) floppy disk drives, was released in May of 1982.

How does a serial mouse work?

It uses a RS-232C serial port via D-subminiature connector to provide power to the mouse and also gather data of its motion for the pointing function.

How does operating system work with mouse?

Typically mouse driver has the information of the current mouse state (position and button states) and tells them to the application or operating when it asks them. Typically the mouse drive calls mouse cursor moving routines when mouse is moved and sends messages to the software when buttons are pressed.

How do I enable my mouse?

Select Hardware and Sound. Under Devices and Printers, select Mouse. In the Mouse Properties window, select the tab labeled TouchPad, ClickPad, Device Settings, or something similar. There should be an option for enabling and disabling the TouchPad.