How do you remove the throttle cable from a Polaris carburetor?

How do you remove the throttle cable from a Polaris carburetor?

You’ll need to remove the little side cover on the carb. Adjust the cable for maximum slack, then slide the the cable out. Don’t lose the lil brass fitting attached to the end cable on the carb.

How do you adjust a Polaris carburetor?

Locate the gold pins on the side of the engine. The fuel jets and the air valve are on the bottom of the engine. Open the owner’s manual and locate the adjustment chart. Tighten the jet pins with a screwdriver until they will not go any tighter.

What is a 2000 Polaris 500 worth?


Suggested List Price Average Retail
Base Price $6,999 $1,530
Options (Change)
Total Price $6,999 $1,530

How do you remove the throttle cable on a carburetor ATV?

Open the throttle fully by hand so the cable is loose. There is a slotted brass piece that traps the end of the cable. With the cable loose enough the brass piece comes out towards you and the cable slips out of the brass piece(don’t lose it). You can then unscrew the cable from the carb and pull it out.

How do you adjust the air fuel ratio on a carburetor?

There should be two screws on the front of the carburetor, which are used to adjust the air and fuel mixture. Often these look like flat-head screws and you can use a screwdriver to turn them, adjusting the amount of fuel and air mixing in the carb.

Are Polaris Sportsman 500 any good?

The Sportsman 500 H.O. is a very, very good ATV by any standard. We have yet to find something it was designed for that it couldn’t do, and just like most Sportsman owners, it will go to work all week and be ready to play all weekend.

Does Polaris Sportsman 90 have reverse?

With its easy-to-use electric start system, automatic transmission with reverse, and push-button controls, the Sportsman 90 is every kid’s dream ride.