What is the density of condensate?
What is the density of condensate?
Physical properties of the API gravity and density of condensate are presented in the range of 55-60° and 0.71-0.76 g/cm3.
How do you find the density of oil?
Mathematically, density, mass and volume are related according to the following formula: ρ=m/V where ρ=density, m=mass and V=volume. The density of most oils will range between 700 and 950 kilograms per cubic meter (kg/m3).
Is condensate heavier than oil?
How is Condensate Formed? NGLs are naturally occurring hydrocarbons that are lighter in molecular composition than crude oil or natural gas. They occur as vapor in natural gas and can be dissolved in crude oil or occur separately in oil reservoirs.
How do you convert API to density?
The formula can be reversed to find the density of the petroleum liquid. Add 131.5 to the API gravity. The formula for API gravity is API = (141.5/SG) -131.5 where SG is the specific gravity of the petroleum liquid being measured. For example, for an API gravity of 50, add 131.5 to obtain 181.5.
What is the API gravity of condensate?
50 degrees to 120 degrees
“The API gravity of condensate is typically 50 degrees to 120 degrees,” according to Schlumberger’s online Oilfield Glossary.
What is the difference between oil and condensate?
Condensate is an oil, but an extremely light one. Condensate is, as mentioned, a byproduct of hydrocarbon drilling and it may be in either liquid or gas form, depending on the pressure and temperature at the time it’s released. It is nearly transparent and almost odorless.
Does condensate float on oil?
Crude oil is heavier than condensate. When an oil spill occurs, the oil floats and forms a thick layer on the water surface, which cuts off oxygen for marine life and destroy ecosystems.
What is the difference between API gravity and density?
API gravity is thus an inverse measure of a petroleum liquid’s density relative to that of water (also known as specific gravity). It is used to compare densities of petroleum liquids. For example, if one petroleum liquid is less dense than another, it has a greater API gravity.
How is condensate measured?
1) One pound of Condensate is equal to or the same as one pound of Steam. 2) Due to the nature of Condensate (Liquid), it is a much easier medium to measure with high reliability, accuracy, and turndown.
How to forecast condensate oil production from constant volume gas reservoirs?
In this circumstance, the reservoir pressure is determined according to the material balance analysis, and then the condensate oil production is forecasted through the constant volume depletion test. When the reservoir pressure is higher than the dewpoint pressure, the material balance equation of constant volume gas reservoirs is used directly.
What is the density of crude oil at 50°C?
To be sure you have used the correct figure for correction factors, the easy rule is that the volume increases with increasing temperature. 1. You have 100 liters of a light crude oil with a density of 761 kg/m 3 at 50°C.
How do you calculate the molar flow rate of a condensate?
The molar flow rate of the condensate, n liq, is determined from its density and molar mass as follows: nliq=qliqρliqMliq=(5m³/day)(908kg/m³)268kg/kmol=119kmol/day. in which the density and molar mass are taken from the condensate analysis.
What happens to the density of lubricating oil when temperature changes?
If the temperature changes, the density of the lubricate changes along the colored line. Examples of the useof the figures are given below the figures. If you have the lubricating oil density given in °API, use the API-to-gravity converter.