How do I block Facebook on my TP-Link wireless router?

How do I block Facebook on my TP-Link wireless router?

Go to Access Control > Host, then click Add New… Select ‘IP Address’, then enter a short description for the host rule you want to define in the ‘Host Description’ box. Enter the IP address range on your network that you want to block access to.

How do I log out of TP-Link Router?

There are no logout buttom from web interface & if you close browser or the tab then you reopen the router’s URL & will detect that still logged in. you must force close the browser App from setting. We appreciate your feedback.

How do I change my TP-Link settings?

How do I configure the basic wireless settings for my TP-Link 11N routers (new logo)?

1. Log into the router’s web management page:
2. Select Wireless->Wireless Settings on the left side menu to open the wireless setting page.
3. Select Wireless->Wireless Security on the left side menu.
4. Click Save button to save the settings.

How can I block Facebook app and messenger from my TP Link router?

How do I block Facebook on my TP Link wireless router? Go to Access Control > Host, then click Add New… Select ‘IP Address’, then enter a short description for the host rule you want to define in the ‘Host Description’ box. Enter the IP address range on your network that you want to block access to.

How can I block Facebook on my router?

Generally, you’ll need to enter your router’s IP address into a web browser to access the settings. Once you’re in the settings, look for a section called “Access Restrictions” or “App Blocking.

How do I logout of Tenda router?

change the default User Name and Password.

1. 4.3. 9.8 System Log. In System Log, you would check the system record, and see if there is. network attack. Clear: To clear system Log.
2. 4.3. 10 Logout. After completing settings, please click ‘Logout’ to exit. TEI480T/490T/4000 Enterprise & Net-bar Level Router.

How do I reset my TP-Link router settings?

With the Router powered on, press and hold the WPS/RESET button (more than 10 seconds) until the SYS LED becomes quick-flash from slow-flash. Then release the button and wait the Router to reboot to its factory default settings.

How do I manage my TP-Link router?

How do I configure Remote Management for my TP-Link Wireless Router?

1. Open the web browser and in the address bar type in:
2. Type the username and password in the login page.
3. Click Security->Remote Management on the left side.
4. With the default setting (Port 80 and IP address 0.0.
5. Click Save to save the settings.

How do I block Facebook from my WIFI?

How can I block Facebook app and messenger from my TP Link Router?

How do I log into TP Link?

http://192.168.1.1http://192.168.0.1http://tplinkwifi.net. 3. Log in to the TP-Link router. Enter your username and password on the login screen. If this is your first time, you will need to use the default credentials: username: adminpassword: admin. 4. Change the router password.

How to setup a TP Link?

Turn off the modem,and remove the backup battery if it has one.

Connect the modem to your router’s Internet port with an Ethernet cable.

Turn on the modem,and then wait about 2 minutes for it to restart.

Connect the power adapter to the router and turn on the router.

How to configure a TP Link router?

How to configure the basic wireless settings of TP-Link wireless DSL router. Step 1 Open the web browser and type the IP address of the device in the address bar (default is 192.168.1.1). Press Enter. Step 2 Type the username and password in the login page, the default username and password both are admin, Then click OK to log into the device.

How do I Pair my TP Link?

a. Press and hold the Pair button for one second on the Powerline Adapter. Then the Power light will be blinking quickly. Note: If the Power light is not blinking, please press the pair button for a longer time. For more details, please refer to the Quick Installation Guide or User Guide.