How do I connect my Yamaha YWA-10?

How do I connect my Yamaha YWA-10?

Connecting the YWA-10 to your wireless network a. Press the WPS button on your wireless router. b. Press and hold down the WPS button on the rear of the YWA-10 for 10 seconds or until the WPS indicator light turns solid.

What does the Yamaha YWA-10 do?

Wireless Network Adapter The Yamaha YWA-10 wireless network adapter can be used to connect a Yamaha network AV receiver to a wireless home network. The YWA-10 connects to the Ethernet port on the back of your Yamaha network receiver and communicates directly with your wireless router.

How do I connect my Yamaha receiver to WIFI?

Wi-Fi Setup

  1. Power on the Receiver and the TV.
  2. Press the On Screen button.
  3. Arrow Down to Setup and press Enter.
  4. The Setup Menu will come up.
  5. Arrow to the Right repeatedly to get to Network.
  6. Select Network Connection and press Enter.
  7. Arrow Down to Wireless (Wi-Fi) and press enter.
  8. Arrow Down to OK and press Enter.

How do I reset my YWA 10?

YWA-10 Wireless Network Adapter Reset Procedure

  1. Make sure that the YWA-10 is powered on.
  2. Using a paper clip, press and hold down the Reset button on the side of the YWA-10 about 15 seconds until all three lights start to flash On and Off.
  3. Release the Reset button.

How do I use my Yamaha UD WL01?

1: Insert UD-WL01 into USB TO DEVICE jack of your instrument. 2: Press and hold the WPS button on UD-WL01 for 3 seconds. 3: Press the WPS button on your wireless router. *If your wireless router is not WPS-capable, please refer to the connection manual in the support tab.

How do I connect my wifi to my receiver?

How to set up the Satellite TV Wi-Fi adapter

  1. Connect the Wi-Fi adapter to a USB port on the front or back panel of your receiver.
  2. Select Setup.
  3. Choose your home Wi-Fi network and select Done.
  4. Enter your Wi-Fi password (or encryption key) and select Done.
  5. Your receiver will test the Wi-Fi connection.

How do I connect my HD receiver to my Wi-Fi?

How does a Wi-Fi receiver work?

The signal passes through the plastic casing of the receiving antenna and strikes the copper wire within. It then travels along the length of that wire, which leads to a wireless network adapter. The network adapter interprets the electronic pulse into data and passes it to the computer or router that it serves.